工藝流程：

Process flow:

這種處理系統組合十分緊湊，集吸附、脫附和催化燃燒于一體。

This treatment system combination is very compact, integrating adsorption, desorption, and catalytic combustion.

對于連續工作，設有兩個吸附床交替使用，以保證生產和凈化過程的連續操作。

For continuous work, two adsorption beds are used alternately to ensure continuous operation of production and purification processes.

對于間斷工作，采用單個吸附床就能問題。

For intermittent work, using a single adsorption bed can solve the problem.

吸附箱：

Adsorption box:

吸附：有機廢氣經過干式漆霧過濾器去除漆霧，然后進入填充了活性炭的吸附床，吸附凈化。

Adsorption: Organic waste gas is first removed by a dry paint mist filter, and then enters an adsorption bed filled with activated carbon for adsorption purification.

吸附后的凈化氣體直接排空。

The purified gas after adsorption is directly discharged.

脫附箱：

Desorption box:

脫附：當流出床層吸附飽和時，即停止本床層的吸附操作（切換到另一吸附床）。

Desorption: When the outflow bed is saturated with adsorption, the adsorption operation of this bed is stopped (switching to another adsorption bed).

對于達到允許吸附量的吸附床，按一定的濃度比把吸附在活性炭上的有機物用熱風進行脫附。

For an adsorption bed that reaches the allowable adsorption capacity, the organic matter adsorbed on activated carbon is desorbed using hot air at a certain concentration ratio.

脫附出來的高濃度有機氣體再經過換熱器預熱，進入催化床燃燒分解為二氧化碳和水。

The high concentration organic gas desorbed is preheated by a heat exchanger and enters the catalytic bed for combustion and decomposition into carbon dioxide and water.

催化燃燒箱：

Catalytic combustion chamber:

在催化燃燒階段，不需要外加熱源。

In the catalytic combustion stage, no external heat source is required.

燃燒后的尾氣一部分排往大氣，一部分送往吸附床用于活性炭脫附再生。。

Part of the exhaust gas after combustion is discharged into the atmosphere, while another part is sent to the adsorption bed for activated carbon desorption and regeneration..